L
NAPCO Security Systems
X
GEM-X255 Programming Instructions
WI1092B 9/02
!
Page 51
ZONE DESCRIPTIONS
Enter an identifying description for each
zone. Buttons
1
and
2
set the cursor
position; buttons
3
and
6
scroll
numbers, letters, punctuation marks, etc.
!
Position the cursor over the displayed
Zone Number (i.e., “01”) using buttons
1
and
2
.
!
Change the Zone Number using buttons
3
and
6
.
!
Position the cursor over the first
character of the description field.
Advancing the cursor between
characters, program a description of up
to two lines for the new zone using
buttons
3
and
6
.
!
Press the
J
button to save. Advance to the next zone as in Steps 1 and 2 above and repeat this procedure until all zones have
been programmed.
NOTE: All 255 Zone Descriptions may be keypad programmed in both User and Dealer program modes.
Programming Zone Descriptions
To Program Zone Descriptions
1. Set the Cursor Position using
buttons
1
and
2
.
2. Select characters for zone
description using buttons
3
and
6
.
4. Press the
J
button to save
each descriptor.
NOTE:
Press
G 0
button to clear character at cursor.
To continue press
E
or
F
button.
001-_____________
________________
Us
er Progra
m Mode:
Zone Des
cri
ptions
