LIBRA LIB-P432EX Series Programming Instructions
NAPCO Security Systems
Page 30
AREA ARMING OPTIONS (ADDRESS 1469-1472)
PRIORITY AREA ARMING:
1. Select option from the table shown.
2. Enter either blank (•) or "1" in corresponding address location.
NOTE:
Dark shaded data value box shows option not available.
3. Press
u
to save.
PRIORITY ARMING/AREA 1
DATA ENTRIES
OPTION
blank (•)
Not Used
Enabled
1
PRIORITY ARMING/AREA 2
DATA ENTRIES
OPTION
blank (•)
Not Used
Enabled
1
Priority
Arming
Area 1
ADDRESS
1469
[Default = blank (•)]
Priority
Arming
Area 2
ADDRESS
1470
[Default = blank (•)]
ZONE INTEGRATION TIME (ADDRESS 2062)
Zone Integration Time:
The panel Zone Integration (Response) time can be adjusted
to a new global value. Address 2062 accepts three decimal digits which are multiplied by
10 milli-seconds to get a new value that replaces the default value of 750ms. If the loca-
tion is set to 000, the system will default to 750ms internally. The maximum value is 255.
If a value above 255 is entered the system will display 000 to request a re-entry.
Note:
Only the panel zones’ integration times are programmable. In addition, zone re-
sponses are enabled only when armed.
1. Enter digit only.
2. Valid entries are: 001-750.
NOTE:
Default is 750ms (075 x 10ms).
3. Press
u
to save.
ADDRESS 2062
[Default = 075 x 10ms]
Zone
Integration
Time (x 10ms)
PRIORITY ARMING/AREA 3
DATA ENTRIES
OPTION
blank (•)
Not Used
Enabled
1
PRIORITY ARMING/AREA 4
DATA ENTRIES
OPTION
blank (•)
Not Used
Enabled
1
Priority
Arming
Area 3
ADDRESS
1471
[Default = blank (•)]
Priority
Arming
Area 4
ADDRESS
1472
[Default = blank (•)]
