6-1050A
5
Rev. 09/29/19
Always turn off the air supply, drain
hose of air pressure and detach tool
from air supply before installing,
removing or adjusting any part or
accessory on this tool, or before
performing any maintenance on this
tool.
Needle Scalers are used for removal
of rust, old paint, concrete and slag
from new welds on many uneven
metal surfaces. Needles adapt
themselves to flat, curved and
uneven surfaces.
Excessive speed reduction indicates
too much force being applied to the
work surface.
Apply moderate hand pressure to the
tool and allow the tools accessories
to do the work.
NOTE:
During operation, safety
goggles must always be worn to
guard against flying rust and chips
(users & bystanders).
OPERATION
Specifications
Weight .................................. 5.30 lbs.
Length ..................................... 13.19"
Blows per minute .............4,700 RPM
Bore Diameter ............................. 3/4"
Chisel Shank Opening ............... .401"
Stroke Length ...........................1-5/8"
Number of Needles ..................19 Pc.
Sound Level .........................110 dBA
Vibration Level ....................13.5 m/s2
Air Inlet ............................... 1/4" NPT
Min. Hose Size .....................3/8" I.D.
Avg. Air Cons. ....................16 SCFM
WARRANTY
Important: DO NOT RETURN DEFECTIVE PRODUCT OUTSIDE OF ORIGINAL ONE (1) YEAR WARRANTY PERIOD TO
PLACE OF PURCHASE.
WARRANTY POLICY:
This Carlyle Air Tool is warranted against defects in material and workmanship for a period of One (1) Year
from the date of original purchase. We will replace, at our option, any part which proves to be defective in material or workman-
ship. Repairs or replacements are warranted as described above for the duration of the original warranty period. In the unlikely
event a replacement unit is required during this One (1) year period, return the unit to your local NAPA Auto Parts Store for a
replacement. This warranty does not apply to products which have been subjected to abuse, misuse, modification, neglect, lack of
maintenance, use in a production-related service, or repaired by anyone other than an Authorized Carlyle Air Tool Service Center.
For complete listing of Authorized Master Repair Centers, see enclosed Customer Warranty Repair Form, or
visit www.toolwarrantyrepair.com
6-1050A_Manual_092619.indd 5
9/26/19 4:09 PM