Nantian Electronics PR9 ES, Service Manual

Page: 52 / 112

PR9 Service Manual
Page 47 of 102
3.3.4.5. BIDIRECTION ALIGNMENT ADJUSTMENT:
You can select different CPI and quality for adjusting in the bidirection alignment print.
Classification :
RESULT OF ALL SPEED
HSD 10CPI
DRAFT 10CPI
DRAFT 12CPI
HSD 17.1CPI
DRAFT 17.1CPI
NLQ 10CPI
NLQ 12CPI
LQ 10CPI
NOTICE :
Before adjusting bidirection, you'd better select the "RESULT OF ALL APEED",
print all the result of all modes and check it, then do the adjustment according
your requirement.
Entering the adjustment, LCD shows:
Press key or key
until the LCD shows:
Press key to accept, LCD shows:
Press key or key until the LCD shows the CPI and
Quality which you want to align, press key to accept, and LCD shows:
If you want to see the print effect, insert A4 sheet, the printer will feed the paper
automatically, print the effect and eject the sheet automatically. You can select
according your requirement by pressing
key (means moving
leftwards) and key (means moving rightwards), then you can start
to adjust, the LCD will show :
After select the value you want.
Press
key to accept, it will be saved , LCD show :
Now you can select other operations you want.
> Press key, it will leave from the bi-direction align printing and enter
The classified selection of adjustment, LCD shows :
Now you can select other operations you want.