NanoVibronix PainShield, User Manual

Page: 10 / 32

PainShield® MD User Manual
10
4 Product Features
4.1 Preset Treatment
PainShield® MD is preconfigured to provide intermittent ultrasonic output at a
preset frequency of 90 kHz and low intensity, neither of which can be modified
by the user.
When in ON mode, PainShield® MD alternates automatically between 2
phases:

Active phase—PainShield® MD delivers 30 minutes of ultrasound
therapy.

Idle phase—PainShield® MD is idle for 30 minutes.
1 active phase + 1 idle phase = 1 cycle.
PainShield® MD automatically switches to OFF mode after 6.5 hours, at which
point, the battery should be recharged.
4.2 Battery Operation
Powered by a rechargeable lithium-ion battery, PainShield® MD can provide
6.5 hours of continuous therapy on a single battery charge. After 6.5 hours,
PainShield® MD automatically switches off, and the battery must be recharged.
You can switch PainShield® MD to OFF mode, manually, at any point of time.
4.3 PainShield
®
MD Adhesive Patches
The adhesive patches secure the actuator to the affected area. The actuator
converts energy to ultrasonic therapeutic waves.
The single-use adhesive patches come in two sizes to better fit application in
various body areas:
Large patch - 90 mm x 107 mm
Small patch - 60 mm x 70 mm