NanoVibronix PAINSHIELD MD, User Manual

Page: 12 / 36

12
OPERATING CYCLE 5.1
5.2
Product F
eatures
5
0
PainShield
®
is preconfigured to provide
intermittent ultrasonic output at a pre-set
frequency which cannot be modified by the user.
When in ON mode, the PainShield
®
alternates
between 2 phases:
Active phase — PainShield ® delivers 30 minutes
of ultrasound therapy.
Idle phase — PainShield ® is idle for 30
minutes.
1 active phase + 1 idle phase = 1 cycle.
PainShield
®
counts the number of cycles,
which is displayed as “C1” to “C6” and
automatically switches to OFF mode after 6.5
hours.
The battery should be recharged following use.
BATTERY OPERATION
Powered by a rechargeable lithium-
ion battery, PainShield
®
can provide
approximately 6.5 hours of continuous
therapy on a single battery charge. After 6.5
hours, PainShield
®
automatically switches off,
and the battery must be recharged.
You can switch PainShield
®
to OFF mode
manually at any point of time.
The internal battery can undergo greater
than 500 full charge cycles. The operational
time may decrease over time.
When not in use, it is recommended to store
the driver with 50% charge on the battery.