Technical manual
SMCP33
Commissioning
8
Issue: V 1.1 - 01.02.2010
Step Action
Note
6
Start the NanoPro software.
The NanoPro main menu
appears.
7
Select the <Communication> tab.
8
In the "Port" field, select the COM port to which
the SMCP33 is connected.
The number of the COM
port to which the controller
is connected can be found
in the device manager of
your Windows PC (System
Control/System/Hardware).
9
Select the "115200 bps" entry in the "Baud rate"
selection field.
10
Select the <Mode> tab.
11
Click on the <Test Record> button to carry out
the pre-set travel profile.
The connected motor
operates with the pre-set
travel profile (default travel
profile after new
installation).
12
You can now enter your required settings.
For instance, you can enter a new travel profile.
See the separate manual
on NanoPro.