Technical
Manual
PD4-N5918
Connection and commissioning
Issue: V 1.4
11
Commissioning with NanoPro (RS485 firmware)
Proceed as follows to commission the Plug & Drive motor with the RS485 firmware:
Step Action
Note
1
Install the NanoPro control software on your PC.
See the NanoPro separate manual.
Download of
www.nanotec.com
2
Connect the Plug & Drive motor according to the
connection diagram.
Connection diagram, see
Section 2.2.
Detailed information on
connections can be found
in Section 3.
3
Apply the operating voltage
(12 V DC ... 48 V DC).
CAUTION!
An operating voltage > 50 V will destroy the
output stage!
•
Follow the information in Section 3.2.
4
If necessary, install the driver for the converter
cable ZK-RS485-USB.
Download
www.nanotec.com
in the
Accessories/Converter
menu item
5
Connect the Plug & Drive motor with the USB
port of your PC.
Use the converter cable
ZK-RS485-USB.
Connection via the RS232 interface is not
possible.
Order number:
•
ZK-RS485-USB
6
Start the NanoPro software.
The NanoPro main menu
appears.
7
Select the <Communication> tab.
8
In the "Port" field, select the COM port to which
the PD4-N is connected.
The number of the COM
port to which the Plug &
Drive motor is connected
can be found in the device
manager of your Windows
PC (System
Supervision/System/Hard
ware).
9
Select the "115200 bps" entry in the "Baudrate"
selection field.
