MAINTENANCE METHODS
5
Second,
place the internal cone and
internal liquid tube into water tank, release
the pressure by pulling trigger of the tool.
The trapped dirt will be cleaned.
First,
Detach the cone, and clean the
Standard Cone cone and joint adaptor.
Third,
squeeze trigger of the tool for 1 minute.
Store in well ventilated, dry place without being exposed to direct sun light.
Standard Cone
(or cone with brush)
Caution
Please detach the standard cone /cone with brush and
liquid tube with care.
It might cause damages to the device.
After finishing working, detach the
vacuum from the tool.
Stop the cleaning process when
the dirt and contaminents are released.
Use caution with the internal cone and internal liquid tube.
Caution
