![nanoskin EVERGREEN EG-1007 Instruction Manual Download Page 4](http://html.mh-extra.com/html/nanoskin/evergreen-eg-1007/evergreen-eg-1007_instruction-manual_705127004.webp)
DIRECTION FOR USE (PREPARATION)
2
Cone Installation/Replacement
Attach standard cone with internal cone, and internal tube with internal liquid tube
(See inset below). Please notice that internal liquid tube might bend during the instal-
lation, please attach it with care. Make sure all the parts are
completely installed.
Please turn off the air compressor while disconnecting the air
plug.
Please connect the air plug and air coupler firmly.
Failure to connect properly might cause the air leaking while in operation.
Internal Liquid Tube
Internal Cone
Standard Cone
Liquid Tube
Internal Liquid Tube
If the internal liquid tube is damaged, the detergent mist will not be spray correctly.
Connection of Vac Hose
If the neck finish of the vac hose and extractor gun hose is different, please use
the joint adaptor to connect them together. (See figure below)
Please turn off the air compressor while connecting the air compressor and air plug.
First, connect the air tube with air plug firmly. Second, connect the air plug with air
coupler. Do not pull the trigger on the tool while connecting.
Vac Hose
Joint Adaptor
**Extractor Gun Side**
**Air Compressor Side**
Air Coupler
Air Tube
Air Plug
Caution
Connection of Compressed Air
Warning
Warning