DIRECTION FOR USE
4
First,
turn off the air reverse switch. Vacuum the dirt without triggering the tool.
To achieve the best result, use the vacuum function ONLY to remove loose dirt
and dust first, then pull the trigger to break down stubborn dirt and contaminants
Second,
please hold the tool securely while in operation. Move the tool back and
forth SLOWLY over the surface. (See figure below)
(NOTE: If you move the tool too fast, it doesn’t break down the stubborn dirt.)
Wear safety goggles and respirator when in operation.
NEVER point the tool in the direction of human body, face or eyes.
Please use the strainer to filter out all the liquid deposit in advance.
(Containers for water or other cleaning solvents are not included in this package)
If applicable, wear safety goggle and respirator when in operation.
Third,
turn on the air reverse switch. Pull the trigger, then move back and forth to
remove stubborn dirt and contaminants with micro particle detergent mist. When
finished working, turn off the air reverse switch. Store the tool in a well-ventilated, dry
place without direct sun light.
Note: For the instruction of liquid adjusting valve and fixed valve, please see previous
page.
Warning
