manualshive.com logo in svg

nanoradar MR76, User Manual, Page: 13 / 24

Share
Download
nanoradar MR76 User Manual Download Page 13

MR76 77GHz MMW Radar User Manual

MR76(v1.1)2020-3-10

Hunan Nanoradar Science and Technology Co., Ltd

13

metal plate has to be ensured in both, horizontal and vertical direction. Any misalignment between the
vehicle driving vector or measuring direction and the metal plate will lead to a failure of object detection.
Instead of a metal plate reflector it would also be possible to use a corner reflector.

Figure 6

Advantage of plate compared to corner reflector

The distance a between sensor device and the metal plate shall be within the range 0.8m < a < 2 m.
Requirements for the material of reflector plate: Aluminum,Iron, Steel.
Requirements for the surface finish of the plate:

Flatness of surface shall be at least f=0.1 mm in each subarea of 80 mm x 80 mm

Roughness RZ < 50

(is equal to <50 µm)

4. Electrical Conditions

4.1 Cable Connection

The MR76 connecting cable is with a length of 3 meters, including the positive and negative pole of the
power supply, the CAN high and the CAN low.
The MR76 radar needs to be powered by battery or other equipment. The power supply line requires a
10A wire. In order to protect the radar from electromagnetic interference, the grounding wire must be as
short as possible.

Summary of Contents for MR76

























Reviews:

No comments