Document # 720004-0000
March 2, 2022
11
Technicians Manual
1.6 Testing the Printer
1.6.1 Configuration Ticket
This test can be used to verify the correct operation of the printer. The test prints a resident
ticket listing the current printer settings. This ticket can also be used to verify the printing quality.
PayCheck™ & PayCheck 2™:
To print the test ticket,
the printer must be powered “ON” while holding the paper feed button for
approximately 5 seconds
. Once repetitive beeping is heard, release the paper feed button. A
test ticket similar to the one below will be printed. Pressing the button again will result in blank
tickets.
PayCheck 3™ & PayCheck 4™:
To print the test ticket,
the printer must be powered “ON” while holding the paper feed button for
approximately 5 seconds
. A status ticket similar to below will be printed. Pressing the button
again will result in blank tickets.
Figure 12: Sample Test Ticket
1.6.2 Printer Performance Metrics
Model:
PAYCHECK 4
Firmware:
PAY-4.82H (0x1CB1)
User Version:
S R.2.4.0
Protocol:
NTL
COMMUNICATION
Interface:
Serial
Baud Rate:
38400,8,NONE
Handshaking:
PRT+RTS
Print mode:
NTL
Back USB :
Fw Controlled
PRINT CONTROL
Speed:
100 mm/sec
Black Bar Index:
Right
No HPQ Burn Time:
250 us
Motor Current:
2
Real-Time Command:
Enabled
Auto Reset Status:
Disabled
Validation Bit:
Smart TOF
Save Valid Bit:
Enabled
PRINTER ENVIRONMENT CONDITIONS
Voltage:
24.7 Volts
Temperature:
25 Celcius
SYSTEM RESOURCES
FLASH Used=00000 RAM: Used=00000
Free=65535 Free=65535
LIBRARY INVENTORY (CUSTOM)
Templates: 6
Regions:
1,2,3,4,5,6,7,8,h,9,A,B,C,D
,E,F,G,I,J,K,L,N,O,P,Q,R,
S,T,U,Z,X,a,b,c,d,e,f,g,i,j,k,
l,m,n,o,p,q,s,t,u,v,w
Fonts :
0,1,2,3,4,5,6,7,8,9,A,B
Graphics:
MANUFACTURING INFORMATION
Printer ID:
P312681
Date Code:
20100215
A to D: 03d8, 021a, 0231, 03c6
Dip Switch Config (1234): 0000
Status: *S|0|PAY-4.82H|@|@|@|I|@|P|*
