EVE
TM
, Automatic Cell Counter ©2013 NanoEnTek Inc.
39
Safety precautions
Review and follow the safety instructions below :
· Do not install the instrument in a humid place such as a greenhouse or an incubator to avoid a
danger of electric shock. If water or other material enters the instrument, the adaptor, or power
inlet, disconnect the power cord and contact a service person. For operating environment, refer to
Product Specifications.
· Do not touch the main plug or power cord with wet hands.
· Always ensure that the power supply input voltage matches the voltage available at your location.
· This instrument is air-cooled and its surfaces may become hot during operation. When installing,
leave a space of more than 10 cm (4 inches) around the instrument and do not place any objects
between the instrument and walls.
· Do not install an instrument on a slant or a place prone to vibrations, which induces the risk of
malfunction or damage of the instrument.
· Never insert any objects into the air vents of the instrument as this can result in electric shock,
personal injury, and equipment damage.
· Plug the power cord firmly into the wall outlet and AC adapter.
· To avoid potential shock hazard, make sure that the power cord is properly grounded.
· Be sure to position the instrument such that it is easy to disconnect.
· Turn off an instrument before unplugging the power cord and/or moving the instrument.
· If an instrument is dropped or broken, disconnect the power cord and contact a service person
The warrant will be void in case of disassembly.
· Use only authorized accessories (adaptor, power cord, and USB driver).
Warning
Class A equipment is intended for use in an industrial environment. In the documentation for the user, a statement shall
be included drawing attention to the fact that there may be potential difficulties in ensuring electromagnetic compatibility
in other environments, due to conducted as well as radiated disturbances.