ADAMII™ ©2016 NanoEnTek Inc.
9
Installation
Install
SW program
1. Turn on the laptop and ADAMII™ by pressing the Power button. At
this time, the slide holder will be ejected automatically.
2. Double-click ADAMII™ icon on Desktop to start the software.
CAUTION:
• You must turn on the ADAMII™ before running the software program.
☞
Note: The ADAMII™ will be ready to use after initialization is
completed when powered on.
☞
Note: When the software runs and is connected with ADAMII™
normally, the state LED of instrument will be lighted up.