NANODRON E, Instruction Manual

Page: 19 / 52

19
Mains Plug
!
3. Operation
!
Error Message
All 5 LED lights on the control panel start
flashing simultaneously in case of fan’s
improper function when device is in operation.
Unit ON
Fan speed +
Fan speed –
Unit Off
To turn the device on, press “
ON
” button on the control panel. The fan starts working with the same speed
as it was set before switching off the device. Fan speed can be regulated with “
+
” (increase) and “
-
”
(decrease) buttons. With pressing “
OFF
” button the device turns off.
Locking the “OFF” button
The “ OFF ” button can be locked to prevent undesirable device shutdown (for example, in case of electrical
supply failure or by mistake). To activate this function while device is not in operation press and hold “ OFF ”
and “ ON ” buttons simultaneously for about 2 seconds (first press “ OFF ” and then “ ON ”). The device will be
turned on to confirm the entry.
To deactivate blocking function press and hold “ ON ” and ““ OFF ” buttons simultaneously for about 2
seconds (first press “ ON ” and then “ OFF ”). The device will be turned off to confirm the entry.
Notice
When turning off the device, fan speed settings are stored in the device memory. With a new start fan
automatically launches operation with the stored speed.
4. Care, maintenance, warranty
Care and maintenance
Regular care and proper maintenance of
NANODRON
® devices in accordance with the following
recommendations ensure continuous and effective operation, reduced wear and low operating costs.
Under health and safety regulations all maintenance and repair works on
NANODRON
®
air-cleaning systems must be carried out only by the service center authorized by
manufacturer or by our specially trained personnel.
中文
english
deutsch