NANODRON E, Instruction Manual

Page: 18 / 52

18
Air Inlet (1)
Air Outlet (2)
Stand
Mains Plug
Control panel
2. Placing into operation
Application scope of
NANODRON
®:
- Intended for long-term constant use in private,
commercial and industrial sectors and public facilities;
- Suitable for installation in all types of premises:
homes, offices and industrial facilities, kindergartens
and schools, hotels and restaurants, medical
establishments, theaters and museums, etc.
Before you start
The device was thoroughly inspected and carefully
packed at the producing factory to ensure safe
transportation. If the package is damaged please
carefully check the device for visible defects right after
unpacking. Do not use the device if any part of it appears
to be damaged. Please contact our authorized dealer
immediately in case of any complaints.
Installation
When choosing a location to install
NANODRON
® make
sure nothing is blocking or restricting air inflow ( 1 ) and
outflow ( 2 ) in order to secure free air circulation inside
the room. Always ensure that the device is not obstructed
with the furniture or other items.
1. Set up the floor stand supplied on a firm even surface.
2. Carefully place
NANODRON
® vertically into the floor
stand with its air outlet nozzle ( 2 ) downwards, as
shown on the picture on the right.
3. Connect the device to the power supply line with
the supplied connecting cable: connect the cable
to the electrical slot on the device panel and then
plug the other end of cable to a standard electrical
(mains) outlet.
NANODRON
® is ready for use.