19
cycling refrigerated air dryer
R
1
Modifying other parameters
Parameters access
• Press and hold SET bu on for 3 seconds un l reach P5.
• Press the UP and DOWN arrows to scroll the list of available parameters.
• Press the SET bu on to show the relevant parameters value.
• Increase or decrease the parameters value by using the UP and DOWN arrows keys.
• Press the set bu on to memorize the parameters value and return to the parameters display.
• Follow the same procedure above to review all of the relevant parameters.
• Press and hold the set bu on for 3 seconds to memorize and lock in the parameters. The display will exit
the parameter se ng menu. Note that if this last opera on of holding the set bu on for 3 seconds is not
completed all changes to parameters will revert to previous values and modi
fi
ca ons to parameters will
not be applied.
Parameters table
parameters
descrip on
min
max
default
unit
/4
Select probe display
(1)
1
3
1
-
/C1
O
ff
set of probe 1
(2)
-50
50
0
°F
Set
Set point
28
39
35
°F
P1
Dura on of auto purge
0
999
2
Second
P2
Time interval between two auto
purges
0
999
1
Minute
P3
Short manual purge cycle
0
999
1
Minute
P4
Long manual purge cycle
0
999
0
Minute
(1)
In NXC dryers, probe 1 is only used. Do not change this parameter.
(2)
This o
ff
set allows taking into account the e
ff
ects of heat transfer between the probe and the measured
environment. Do not change this parameter.
Summary of Contents for NXC Series
Page 1: ...NXC series cycling refrigerated air dryer user guide...
Page 61: ...notes...
Page 62: ...notes...
