4
nitrogen gas generator
GEN
2
i4.0
1. general information
This manual is copyrighted, all rights reserved. It may not, in whole or in part, be copied, photocopied, reproduced, translated, or reduced to any electronic
medium or machine readable form without prior consent in writing from nano purification solutions. It may not be distributed through the internet or
computer bulletin board system without prior consent from nano purification.
©2021 Air & Gas Solutions LLC.
range:
GEN2 i4.0 nitrogen gas generators
models: GEN2 i4.0 -1110/2110/3110 & GEN2 2130/3130/4130/6130/8130/10130/12130
doc no: 17-100-0660
issue: 003
1.1 document introduction
This manual provides factory prescribed maintenance procedures for a nano purification solutions GEN
2
i4.0 Nitrogen Generator. The procedures
illustrated in this document are only to be performed by authorised personnel. For further information regarding the procedures outlined in this document
contact nano purification solutions before proceeding. Read this document carefully before attempting to install, service or operate the generator.
1.2 support and manufacture details
nano-purification solutions Ltd. (Manufacturer)
address:
Dukesway
Team Valley Trading Estate
Gateshead
NE11 0PZ
United Kingdom
telephone:
+44 (0) 191 497 7700
internet:
www.n-psi.co.uk
e-mail:
nano-purification solutions
address:
5509 David Cox Road
Charlotte, NC 28269
USA
telephone:
+1 (704) 897-2182
internet:
www.n-psi.com
e-mail:
canada - nano-purification solutions inc.
address:
7 Petrie Street
St. Catharines,
Ontario
L2P 3J6
Canada
telephone:
+1 (905) 684-626
internet:
www.n-psi.com
e-mail:
germany - nano-purification solutions inc.
address:
Mommenpesch, 46
D-47839 Krefeld
Germany
telephone:
+49 2151 4828 418
internet:
www.n-psi.de
e-mail:
1.3 general safety
For your own safety, when carrying out maintenance work on
the generator, all relevant national safety regulations must be
complied with relating to pressurised and electrical systems.
Only authorised, competent and trained personnel should
maintain the generator, this service guide is intended solely
for such personnel and is to be used only as a reference, it
should not be used to replace conventional training.
NOTES:
highlight important sections
of information where particular care and
attention should be paid.
CAUTIONS
: indicate any situation
or operation that may result in potential
damage to the product, injury to the user,
or render the product unsafe.
annotations
