
MXA51005
51
EN
5. For your convenience, you can hold the control unit with various accessories:
• a cot holder and Velcro - you can tighten the Velcro to the circumference of the
upper edge of the cot;
• holder and double-sided adhesive tape to place it on the side of furniture or another
solid surface;
• cot clip;
• a stand for the control unit - it can be placed, for example, on the bedside table
next to the bed.
Fig. 10 Holder and Velcro
Fig. 11 Holder and adhesive tape
Always make sure that you can hear the control unit.
6.
Perform a usability test at the installation site - see next section.
The monitor is then ready for use.
Fig. 12 Cot clip
Fig. 13 Stand