nanny BM-03 Manual Download Page 16

58

MXA51005

EN | Baby breathing monitor

Modifying the breathing 

monitor

Do not open or modify the monitor. Otherwise, the manufacturer 

cannot guarantee the correct functionality and usability of the 

monitor and assumes no responsibility.

Mechanical damage 

to the device

Do not use the monitor in case of mechanical damage, such as 

breakage of a large part of the device’s plastic cover - this could 

cause excessive release of light or sound, which could harm your 

child. If the indicator symbols are no longer legible, for example 

due to careless or incorrect cleaning, only use the device if you 

can correctly distinguish the light indications of the symbols , 

or ensure that the symbols are marked in an alternative way 

(sticker or special marker pen). Otherwise, send the device for 

service.

Wireless technology 

in range

Please use wireless communication devices, such as wireless 

home networks, mobile phones, cordless phones, and their base 

stations, portable stations, which may affect the proper operation 

of the monitor, at a distance of at least 1 m from any part of the 

monitor.

Amateur radio 

equipment in range

Amateur radio transmitters and their antennas should be at 

least 10 m away. However, the manufacturer cannot guarantee 

the proper functioning of the monitor during radio operation 

due to the various types of equipment, transmission powers and 

antenna systems. 

Baby supervision -

help within reach

Please note that the device can only alert you, but it does not of 

itself prevent the risk of respiratory arrest! If the child has a  

health problem, it is up to you or the doctor to help it. Likewise, 

do not move too far away from your child so you cannot hear 

and be able to respond to an alarm. Do not use the monitor 

in an environment where you may not hear or see the alarm (an 

environment that is too noisy or too bright). Supervision must 

be carried out only by sighted and hearing persons who are able 

to correctly distinguish the alarm and help the child.

Guarantee

The manufacturer is responsible for the functionality of the 

BM-03 product if it is installed and used according to this ma-

nual and its recommendations, otherwise it does not bear any 

responsibility. The manufacturer is not responsible for the 

proper functioning of the product if it has suffered mechanical 

or other damage or if the product’s life span has been excee-

ded. The manufacturer is not responsible for battery defects.

A used or borrowed  

breathing monitor

The manufacturer strongly discourages buying this product 

used or getting it from a hire company. If it is handled 

incorrectly, the sensing device’s sensitivity may be reduced 

leading to, among other things, an increase in false alarms. 

In these cases, the manufacturer is not responsible for the 

product’s functionality.

Summary of Contents for BM-03























Reviews: