background image

4

Read this chapter carefully as it concerns your safety. 

Most  accidents  are  caused  by  failing  to  follow  basic 

safety rules. Be aware of the possible risks involved in 

handling your generating set and make sure you take 

the  necessary  precautions  to  protect  yourself,  those 

around you and your equipment.
This manual contains important safety indications and 

information. 
They are as follows:

I

  Warning!  :

  This  symbol  indicates  the  risk  of  acci-

dents and serious personal injury, substantial property 

damage or serious mechanical faults if the instructions 

are not followed.

I

 Caution! :

 Indicates a risk of personal injury and/or 

property damage when handling a component. 

Notice: 

Indicates  that  important  information  must  be 

known in order to facilitate handling or in particular cas-

es.
Using and handling a generating set entails risks that 

could  prove  to  be  extremely  dangerous.  Some  work 

requires specific knowledge and equipment. This work 

should be carried out by Nanni Diesel authorised per-

sonnel or by a professional. If you have to work on the 

generating  set,  carefully  follow  the  safety  instructions 

set down in this manual.
Certain information is displayed directly on the generat-

ing set in the form of icons. This information helps you 

to  quickly  identify  the  location  of  certain  components 

and avoid possible hazards when working on the set.
Ensure these indications are always visible and replace 

them if necessary.

Indicates that it is essential to 

read the instructions carefully 

before handling the generating 

set.

Indicates electrical hazards.

This icon indicates a risk of fire. 

Stipulates that you are strongly recom-

mended against smoking and producing 

flames or sparks in the vicinity.

Indicates an area containing pressu-

rised fluids.

Indicates the hazardous rotating parts.

Indicates the de-aeration orifice(s) (air 

bleed)

Indicates where to check the coolant 

level

Indicates where to check the engine oil 

level.

Indicates the coolant drain orifice. 

Indicates the oil drain orifice. 

Safety precautions

Indicates the hot parts entailing sub-

stantial risks of burns. 

Summary of Contents for QMS 32T



























Reviews: