Nanni N9.330 CR2, Operator'S Manual

Page: 25 / 108

25
S04 ENGINE WARRANTY
ENGINE IDENTIFICATION
NOTE !
Minor engine details may not be exactly as shown. Some
components may not be part of the engine ordered. Not
binding pictures.
Both the engine and the transmission has an
identification plate that contain several informations.
Keep these plates accessible and in good condition.
Record and keep the engine and transmission serial
number and designation. These numbers should always
be quoted when ordering service and replacement parts.
The engine identification plate is as follow :
NANNI INDUSTRIES S.A.S.
contact@nannidiesel.com
TYP indicates the commercial designation of the engine.
• NR indicates the engine serial number.
• CODE lists various specifications of the engine.
Example :
1
2 3
4
1 : Type of engine
2 : Engine number
3 : Engine code
4 : Nanni number
ENGINE HOMOLOGATION
The engine type can be exhaust emission certified. It
means that Nanni guarantees that all engines of the
same type that are manufactured are approved and
certified by the authorities in accordance with different
exhaust emissions standards.
However, for the engine to be in accordance with this
standards, special requirements for maintenance and
service are to be followed :
• Only Nanni replacement parts must be used.
• Maintenance intervals must be observed.
• The engine must not be modified in any way except
with accessories and service kits approved by Nanni
Industries S.A.S. France.
• Service of the fuel system must always be carried out
by an authorized Nanni workshop.
• No modifications to the air intake and exhaust system
may be undertaken.
• Seals may only be broken by authorized personnel.
• The operation instructions stated in the relevant
manuals should be follow by the user.
Nanni’s responsibility for the engine specification being
in accordance with the certification will be invalidate if
one or several of this conditions are not followed.