8
Fault Detection
The fixture won't boot up properly.
The fixture can light normally,
but controllers are not function.
Diagnosis
If the failure is not solved after the above troubleshooting procedures, please contact the dealer or manufacturer for repair.
LCD display is on but can not opreate light.
1. Please check if the power of the fixture is in "off" position.
2. Please check if there are any loose connection between
the adapter, power cord or port on fixture.
1. Please check whether the DMX original address setting of
the fixture is correct or not.
2. Please check if the XLR signal cable is connected correctly
or is damaged.
The internal CPU is damaged, please contact the supplier or
return to the manufacture.
Genaral Fault Detection and Diagnosis
This manual and all stats within it were produced under controlled conditions, and are accurate at
time of print. Any future changes to design/technical data can be found at www.nanlite.com.