3
7. Dimmer Knob: For adjusting the brightness of the light.
8. Yoke: For connecting the fixture to the light stand and adjusting the direction of the light.
9. Angle Fixing Knob: For adjusting and securing the position of the light on in a given position or direction.
10. Fuse Holder: For placing the fuse.
11. Power Switch: For powering on/off the fixture.
12. AC Power Socket: AC power input interface.
13. Bracket fixing knob: For connecting the fixture and adjusting the horizontal direction of fixture on a stand or other
mounting solutions.
Usage
1
.
Connection with the controller
· The connection cable between the light fixture and control unit, light fixture and light fixture should use three core
shielded cable and make sure it's diameter is not less than 0.3mm2. XLR plug/socket and the wires should be
connected as the pictures as above.
·Pin1, Pin2, Pin3 is for connecting DMX signals, Pin4, Pin5 is connectionless.
▲NOTE: When connecting with socket, make sure the internal pins are not in contact with the inner case. The
fixture can match the DMX(1990) control signal.
·Plug of five-core and three-core XLR plug/socket conversion.
The fixture comes with the five-core XLR plug. If you use the three-core XLR plug, kindly follow below instruction.