Please follow below steps to activate TOT function:
1) Press [MODE] key and then tune [DIAL] knob to
enter menu 11. And TOT displays.
2) Press [MODE] key again to enter the menu.
3) Clockwise or counterclockwise rotate [DIAL]
knob to select: ON / OFF.
4) Press [MODE] key again to confirm after
selected.
5) Press [PTT] key to save the new settings and exit
to normal operating mode.
12. VOX – Voice-operated Setting
VOX function allows launching by voice only
without pressing PTT key and launching stop
automatically once speak stops. Following is VOX
setting process:
1) Press [MODE] key and then tune [DIAL] knob to
enter menu 12. And VOX displays.
2) Press [MODE] key again to enter the menu.
3) Clockwise or counterclockwise rotate [DIAL]
knob to select: ON / OFF.
4) Press [MODE] key again to confirm after
selected.
5) Press [PTT] key to save the new settings and exit
to normal operating mode.
27
Note
: 3 = high sensitivity, which is used when there
is only low background noise.
2 = Medium sensitivity, which is used in most
situations.
1 = low sensitivity, which is used in situation with
high background noise.
13. POWER -- Power Selection
Power of NF-368 can be set as high or low power
according to actual using range and surrounding to
reduce battery consumption. Following is process of
high and low power settings:
1) Press [MODE] key and then tune [DIAL] knob to
enter menu 13. And POWER displays.
2) Press [MODE] key again to enter the menu.
3) Clockwise or counterclockwise rotate [DIAL]
knob to select: ON / OFF.
4) Press [MODE] key again to confirm after
selected.
5) Press [PTT] key to save the new settings and exit
to normal operating mode.
(HIGH refers to high-power 2W, and LOW refers
to low-power 0.5W. When LOW is selected, the
LCD displays icon
).
14. HLF DEV -- Wide / Narrow band selection
28
