steps below:
1) Press [MODE] key and then tune [DIAL] knob to
enter menu 05. And SQL is showed.
2) Press [MODE] key again to enter the menu.
3) Clockwise or counterclockwise rotate [DIAL]
knob to select: 0/1/2/3/4 (usually set as 1, which is
the best sensitivity point).
4) Press [MODE] key again to confirm after
selected.
5) Press [PTT] key to save the new settings and exit
to normal operating mode.
6. Busy channel lockout setting (BCLO)
BCLO function is for prohibiting transmitter when
there are other signals to prevent breaking other
people's communications inadvertently. Please set it
as following steps:
1) Press [MODE] key and then tune [DIAL] knob to
enter menu 06. And BCLO is displayed.
2) Press [MODE] key again to enter the menu.
3) Clockwise or counterclockwise rotate [DIAL]
knob to select: ON or OFF.
4) After selected, press [MODE] key again to
confirm.
5) Press [PTT] key to save the new settings and exit
23
to normal operating mode.
7. LIGHT--Background Light ON / OFF
Selection
1) Press [MODE] key and then tune [DIAL] knob to
enter menu 07. And LIGHT displays.
2) Press [MODE] key again to enter the menu.
3) Clockwise or counterclockwise rotate [DIAL]
knob to select: ON / OFF.
4) Press [MODE] key again to confirm after
selected.
5) Press [PTT] key to save the new settings and exit
to normal operating mode.
When "OFF" is selected, the backlight will
automatically turn off as the transceiver is at Sleep
mode.
8
.
SAVE -- Power-saving function
The transceiver has a very important automatic
power-saving receive function, which allows the
radio to enter sleep state and wake up periodically to
check and receive signal. If there is call in the
channel, NF368 will stay at active status and then
get back to sleep state after call finished. This
feature can reduce battery consumption effectively.
Following is the steps to activate the power-saving
24
