function:
1) Press [MODE] key and then tune [DIAL] knob to
enter menu 08. And SAVE displays.
2) Press [MODE] key again to enter the menu.
3) Clockwise or counterclockwise rotate [DIAL]
knob to select: ON / OFF.
4) Press [MODE] key again to confirm after
selected.
5) Press [PTT] key to save the new settings and exit
to normal operating mode.
(ON is to activate the power-saving mode: LCD
shows "
" power-saving icon and the
transceiver will enter power-saving mode without
signal receiving in 10 seconds at standby state. OFF
is to turn off power-saving feature.)
9. KTONE – Keypad tone setting ON / OFF
If the keypad tone causes inconvenience (especially
operating in the quiet room), it can cancel easily as
following steps:
1) Press [MODE] key and then tune [DIAL] knob to
enter menu 09. And KTONE displays.
2) Press [MODE] key again to enter the menu.
3) Clockwise or counterclockwise rotate [DIAL]
knob to select: ON / OFF.
25
4) Press [MODE] key again to confirm after
selected.
5) Press [PTT] key to save the new settings and exit
to normal operating mode.
(ON is for activating the keypad tone, and LCD
displays icon
. OFF is to turn off keypad tone).
10. APO Automatically Power Off setting
Automatically Power OFF (APO) function refers to
the transceiver turns off automatically without any
operation when there is no signal received in 30
minutes, which helps extend the battery life.
Following is steps to start the APO function:
1) Press [MODE] key and then tune [DIAL] knob to
enter menu 10. And APO displays.
2) Press [MODE] key again to enter the menu.
3) Clockwise or counterclockwise rotate [DIAL]
knob to select: ON / OFF.
4) Press [MODE] key again to confirm after
selected.
5) Press [PTT] key to save the new settings and exit
to normal operating mode.
11. TOT – Time Out Timer
Time Out Timer (TOT) feature is to limit the
continuous launching over time by a safety switch.
26
