- 23 -
the channel selector after operating the
Emergency Call Function.
Low Power Detection
1
．
The device works properly, when the
voltage is higher than 3.6V;
2
．
When the voltage is among 3.4V to 3.5V,
the transceiver receives normally but with
alerts and “dididi” indication every 20secs,
and launches normally, but the light
flashes red while launching.
3. When the voltage is below 3.3V, then the
transceiver will power off by itself.
Wired Cloning (Mutual clone between two
transceivers)
1
．
Well connected the transmission lines to
the both transceivers, and then power on
the subsidiary transceiver.
Summary of Contents for NF-173
Page 2: ...Chart 24...
Page 9: ...7 Identification...
