- 24 -
2
．
Rotate the channel selector on the base
transceiver to channel 8, then hold and
Press “Radio/Monitor/Re” key to
power on, (3 seconds later) until the
orange light (red light and yellow light
flash simultaneously) flashes which
indicates the base transceiver is in cloning
state, then release the button
3
．
When the orange light on the base
transceiver flashes, press the PTT key, the
red light on base transceiver flashes, and
the yellow light on subsidiary transceiver
flashes, which indicates the base
transceiver is in cloning state. The mutual
clone is successful when the light on base
transceiver flashes orange again
。
4
．
If the indicator lights of both two
transceivers flashes abnormally in the
Summary of Contents for NF-173
Page 2: ...Chart 24...
Page 9: ...7 Identification...
