18
APPENDIX A
NANAWALL WD65 OWNER’S MANUAL
13. After installing the panels, assuming that the head
jamb and sill are level, check to see if the gap
between the panel and head jamb and panel and sill
is even across the width of the panel. With the glass
weight, the out of square panels should become
almost even. If they remain slightly higher in the
upper corner with the setting blocks it is okay. If not,
then the lower and upper setting blocks thickness
need to be adjusted. Panels have to be braced
correctly for proper operation.
DIAGRAM 1:
Setting blocks for tension
Setting blocks to keep distance
Br
acing Dir
ec
tion
Br
acing Dir
ec
tion
Br
acing Dir
ec
tion
Setting blocks for tension
Setting blocks to keep distance
Br
acing Dir
ec
tion
Br
acing Dir
ec
tion
Br
acing Dir
ec
tion
