Page 34
7-6-4
Replacing the Solenoid
1.
Remove the gun cover and gun slide (R).
2.
Disconnect the solenoid connector.
3.
Remove 1off cap screw (M3x10) on the gun cover (L) and remove the
solenoid bracket.
4.
Remove 1off cup screw M (M3x8) and detach the earth wire.
5.
Loosen the nuts (16mm dia.) and remove the solenoid.
6.
Remove 2off cup screws M (M4x6) and detach the slide guide.
7.
Pull out the solenoid plunger, taking care not to lose the spring.
8.
Reassemble in reverse order.
Note: When reassembling match the D-type hole of the solenoid
bracket to the D shape of the solenoid and ensure that the E ring
and spacers are in the correct positions.
Summary of Contents for Time Crisis
