NAMCO PAC-MAN BATTLE ROYALE DELUXE Page 7 Operation Manual Download

Page: 7 / 80

1. SAFETY PRECAUTIONS

1-4 Description of warning labels attached to the machine

WARNING

The warning labels describe important safety precautions. Be sure to observe the

following:

•

To ensure that the warning labels attached to the machine are easily legible, install

the machine at an appropriate location with ample illumination and keep the labels

clean at all times. Also, make sure that the labels are not hidden behind another

game machine or other objects.

•

Do not remove or alter the warning labels.

•

If the warning labels become excessively dirty or damaged, replace them with new

labels. To order warning labels, contact your distributor.

Warningzlabels
VG44-12423-00

Summary of Contents for PAC-MAN BATTLE ROYALE DELUXE

















































































Search results

Summary of Contents for PAC-MAN BATTLE ROYALE DELUXE

Reviews:

Related manuals for PAC-MAN BATTLE ROYALE DELUXE

Brands by name

Popular brands

NAMCO PAC-MAN BATTLE ROYALE DELUXE, Operation Manual

Search results

Summary of Contents for PAC-MAN BATTLE ROYALE DELUXE

Reviews:

Related manuals for PAC-MAN BATTLE ROYALE DELUXE

Brands by name

Popular brands