NAMCO PAC-MAN BATTLE ROYALE DELUXE, Operation Manual

Page: 52 / 80

48
8B. SERVICES – To be conducted by a technician only –
8B-3 Error display (for the technician)
z
If the error indication remains after the appropriate
countermeasures have been taken, set the Test switch to ON and
then to OFF to cancel the error indication.
Error code Error indication Cause Remedy Page
1-2 COIN ERROR 2
Service button failure or
some other problem near the
button
Contact your distributor.
1-11
COIN ERROR 1
(COIN UNIT 1)
COIN UNIT 1 failure
Replace the coin selector or
bill acceptor connected to
COIN UNIT 1.
COIN UNIT 1 wiring harness
failure
Contact your distributor.
1-21
COIN ERROR 1
(COIN UNIT 2)
COIN UNIT 2 failure
Replace the coin selector or
bill acceptor connected to
COIN UNIT 2.
COIN UNIT 2 wiring harness
failure
Contact your distributor.
1-31
COIN ERROR 1
(COIN UNIT 3)
COIN UNIT 3 failure
Replace the coin selector or
bill acceptor connected to
COIN UNIT 3.
COIN UNIT 3 wiring harness
failure
Contact your distributor.
2-3
BACKUP MEMORY
ERROR 1
Backup memory damage Initialize the backup memory. Page 34
MAIN PCB failure Replace the MAIN PCB. Page 49
2-4
BACKUP MEMORY
ERROR 2
Backup memory damage Initialize the backup memory. Page 34
MAIN PCB failure Replace the MAIN PCB. Page 49
2-5 BATTERY ERROR
The MAIN PCB backup
battery is dead.
Replace the battery. Page 50
3-1 I/O ERROR 1
The connectors on the I/O
PCB are disconnected.
Connect them securely. Page 51
I/O PCB failure Replace the I/O PCB. Page 51
3-3 I/O ERROR 2
The connectors on the I/O
PCB are disconnected.
Connect them securely. Page 51
I/O PCB wiring harness
failure
Contact your distributor.
3-11 I/O ERROR 3
The connectors on the A.I.
PCB are disconnected.
Connect them securely. Page 52
A.I. PCB failure Replace the A.I. PCB. Page 52
3-13 I/O ERROR 4
The connectors on the A.I.
PCB are disconnected.
Connect them securely. Page 52
A.I. PCB wiring harness
failure
Contact your distributor.