Page 44
GUN INITIALIZE (1P)
GUN INITIALIZE (1P)
AIM AT CENTER OF THE CROSS
AND PULL GUN TRIGGER
AIM AT CENTER OF THE CROSS
AND PULL GUN TRIGGER
3.
Press the Enter switch. The following screen will be displayed.
4.
Aim and fire at the cross in the top left corner. The screen will change to
show the cross in the bottom right corner.
5.
Aim and fire at the cross. The screen will return to displaying the cross in
the centre of the screen. Check that the shot mark appears where the gun
is being aimed. If the shot mark is not correct repeat steps 3 and 4.
6.
When the aiming is correct push the Up Select switch and the Enter
switch together to return to the GUN INITIALIZE screen.
7.
Repeat items 2 to 7 for the other gun.
Line of Sight
10cm approx
Rear sight
