Nambuk NRD-1000, Product Manual

Page: 11 / 53

Operating Manual
NRD-1000
Nambuk Co.,Ltd 11
WARNING
w
Chips in the machine should be removed by a hook with safety glasses on after
the spindle is stopped completely.
w
Objects you work on should be fixed firmly or they could pop up
w
Ground connection is required. Do not ground onto inappropriate place like gas
pipes.
w
Electric Danger (High Voltage)
Turn off the main power off and lock the device. If you don’t, it could cause
electric shock or serious injuries.
w
The object you work on should be treated carefully. Falling down on your feet
could cause serious injuries
w
Electric wiring should be connected to a power with ground fault circuit interrupter
w
Please keep away when it's stopped for power problem, power could automatically
get back on.
w
Do not use the machine at the place around combustible gas
w Please be aware of the location of the emergency stop switch
.
w
The machine should be stopped completely for repair, parts exchange, check or
when notice of potential hazard
w
All parts should be installed at the appropriated place
w
Please inform the manager or person in charge when repair or check after the
machine stopped completely
w
Please check the machine and around if there is any possible hazard before turn
on the power.
w
Please read all instructions carefully prior to operate the Tapping Machine.
w Do not use the machine for other purposes.
w
Do not overload
w
Do not disassemble or convert.
w
Applicable voltage or frequency (imprinted on motor) used only.
w
Applicable electric fuses use only
Unapproved changing electric circuit diagram cause electric fault.
w Operators should wear safety glasses, hat, shoes, etc.
w
Please contact our customer service when safety covers damaged for new ones.