A3LA-R-MIL-MOD User Guide Version B
Document Number: 451-93156-001A
95 of 159
4
CLIR provisioned in temporary mode, defaulting to presentation allowed
B.102 +IPR
–
F
IXED
DTE
R
ATE
Set Command: +IPR=<rate>[,<autoflag>]
Set the data rate at which the A3LA-R will accept commands. The change in data rate
takes effect after the result code (e.g. OK) is received by the DTE.
<rate> takes the following values:
1
600 bps
2
1200 bps
3
2400 bps
4
4800 bps
5
9600 bps
6
19200 bps (default)
7
38400 bps
<autoflag> takes the following values:
0
Fixed rate – automatic rate adjustment is disabled
1
Automatic rate adjustment is enabled (default)
Read Command: +IPR?
Query the current data rate and automatic rate adjustment setting. The response is
in the form:
+IPR: <rate>,<autoflag>
Test Command: +IPR=?
List the supported data rates. The response is in the form:
+IPR: (supported <rate>s),(supported <autoflag>s)
B.103 +SBDWT
–
S
HORT
B
URST
D
ATA
:
W
RITE A
T
EXT
M
ESSAGE
Exec Command: +SBDWT=[<text message>]
This command is used to transfer a text SBD message from the DTE to the single
mobile originated buffer in the A3LA-R.
The text message may be entered on the command line:
