Step Nine: Charge the battery.
Operate the electrical system when the battery has been adequately
charged and the battery is secured to the frame mount.
Your Nakto bike comes partially charged. We recommend you Connect
the charger input plug (110/220-volt plug) to the power outlet for 3 to 4
hours. The charger light will go from red to green when it is fully charged.
Step Ten: Ensure all hardware is tightened properly
following recommended torque values.
Recommended Torque Values:
Hardware Loca
�
on
Hardware
Torque Required
(Nm)
Handlebar Area
Handlebar Stem Clamp
Bolts
10
Handlebar Area
Stem Bolts
10
Handlebar Area
Brake Lever Clamp Bolt
6
Handlebar Area
Shi
�
er Clamp Screw
6
Handlebar Area
Angle Adjustment Bolt
18
Brakes
Caliper Adapter to Frame
6-8
Brakes
Caliper to Adapter
6-8
