2.Now stand the bike upright. Place some foam padding under the front
fork if placed on the ground or put it on bike assembly/repair stand if you
have one. We want to keep your bike looking new!
Step Two: Assemble the front wheel.
1.Loosen the thumb nut on front wheel to make enough room for the
front fork.
2.While keeping the lever open, lift the front of the bike and lower the fork
onto the wheel axle.
Notice:
The brake rotor should go into the brake
caliper in between the brake pads and the axle should enter the fork
dropouts fully. The front rotor orientation should be to the left of the fork.
