www.NakayamaTools.com
10
carrying power tools with your finger on the switch or plugging in power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on.
A wrench or a
key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times.
This enables better
control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from moving parts.
Loose clothes, jewellery or long hair can be caught in
moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used.
Use of these devices can reduce dust
related hazards.
4) Power tools use and care
a) Do not force the power tool. Use the correct power tool for your application.
The
correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off.
Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool.
Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power tools operation. If damaged, have
the power tool repaired before use.
Many accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc., in accordance with these instructions
and in the manner intended for the particular type of
power tool, taking into account the
working conditions and the work to be performed.
Use of the power tool for operations
different form intended could result in a hazardous situation.
5)
Battery tool use and care
a)
Ensure the switch is in the off position before inserting battery pack.
Inserting the
battery pack into power tools that have the switch on invites accidents.
b)
Recharge only with the charger specified by the manufacturer
.
A charger that is suitable
for one type of battery pack may create a risk of fire when used with another battery pack.
c)
Use power tools only with specifically designated battery packs
.
Use of any other battery
packs may create a risk of injury and fire.
d)
When battery pack is not in use, keep it away from other metal objects like paper
clips,
coins, keys, nails, screws, or other small metal objects that can make a
connection from
one terminal to another
.
Shorting the battery terminals together may cause burns or a fire.
e)
Under abusive conditions, liquid may be ejected from the battery; avoid contact.
