10
in poor weather conditions and when the
surrounding area is wet. Only work when the
light conditions are good.
- Always keep the cutting line well away from
the body, particularly the hands and feet, when
you switch on the motor and while the motor is
running.
- Never start the equipment when it is turned
over or not in the correct working position.
- Never try to stop the cutting device (cutting
line) with your hands. Always wait until it has
stopped rotating.
- Switch off the motor and disconnect the plug
from the mains socket:
•
Whenever you are not using the equipment
•
If the equipment is left unattended
•
When the equipment is being cleaned,
maintained or is to be inspected
•
When relocating the equipment
•
If the power or extension cable is damaged
•
When you remove or exchange the cutting
device or manually adjust the length of the
cutting line
- Check when starting up and working with the
cutting head that it does not come into contact
with stones, rubble, wire or other foreign bodies.
- Take care not to provoke injuries on each device
used for cutting the string lengths. After pulling
out a new string, always hold the machine in its
normal working position before switching it on.
- Always be very careful about the cutting device
as it can cause very serious cuts
- Never try to stop the cutting device (cutting
line) with your hands. Always wait until it has
stopped rotating.
- Only use an original cutting line/cutting blade.
The use of a metal wire instead of the nylon line/
blade is impermissible.
- Do not use the equipment to cut grass that is
not growing on the ground, e.g. grass on walls,
rocks, etc.
- Do not traverse gravel paths while the
equipment is operating.
- Do not operate the equipment in the vicinity of
inflammable liquids or gases as this could give
rise to the danger of a fire or explosion.
- Store the equipment in a dry place that is not
accessible to children.
- Only use spare parts and accessories that
have been supplied or recommended by the
manufacturer.
- Never try to repair the equipment yourself.
All work that has not been listed in these
Instructions must only be carried out by an
authorised servicing agency.
Electrical safety
CAUTION! The following states how to avoid
accidents and injuries due to electric shock:
- Before each usage, check the mains power
cable and the extension cable for damage and
signs of aging. Do not use the device if the cable
is damaged or worn.
- Always keep the extension cable well away
from the cutting tools. Should the power cable
become damaged during work, then instantly
disconnect the power cable from the mains.
DO NOT TOUCH THE POWER CABLE BEFORE IT
HAS BEEN DISCONNECTED FROM THE MAINS!
- If the power cable for this equipment
is damaged, it must be replaced by the
manufacturer, a customer service agent of the
same or a similarly qualified person in order to
prevent hazards.
