background image

WWW

.N

AKAYAMA

T

OOLS

.

COM

 

 

5) Service 

a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the 

safety of the power tool is maintained. 

 

SPECIAL SAFETY INSTRUCTIONS 

 

 

 

 

 

 

 

 

 

 

-Switch off the machine and disconnect the plug from the power supply when the machine is left unattended, maintenance is 

being carried out, for cleaning, blade oiling or when the blades are blocked or any object to be removed from the blade. 

-Make sure that the protection guard is always mounted to the machine when using the hedge trimmer. Never remove any 

of its components and never use a damaged or incomplete machine and never modify any of the machine components or 

tamper with the original trimmer arrangement in any way. 

-The use of a circuit is required for machines for outdoor use. The machine has to be connected to socket outlets with earth 

contact. 

-Only use splash proof extension cord approved for outdoor use and marked accordingly. 

-Make a loop in the extension cord and hang into the cable holder as shown in (6). 

-Before using the hedge trimmer, check the machine, extension cord and plug. If any components are worn or damaged, 

have them checked, repaired or replaced by an authorized service centre. 

-Remove the plug immediately, if the cable or extension cord has been damaged or cut. 

-Always wear suitable clothing, anti-slip shoes and close-fitting garments, which cannot get caught, however, do not restrict 

movement. Tie long-hair back or protect with a hair net. Do not wear bracelets or long jewellery, which could get entangled 

in moving parts. 

-Always wear safety goggles or a face guard, protective gloves and, if the noise exceeds 85 dB (A), also wear ear guards. 

-Do not use the machine when it is raining or on wet hedges. 

-Individuals below the age of 16 and individuals, who are not perfectly familiar with the instruction, are not allowed to use 

the machine. 

-Within the working area, the person using the machine is responsible for any damage or injury sustained by third parties or 

their property which has been caused by the machine. Watch your working area and do not allow third persons or animals to 

be around. 

-When operating the machine take great care and always hold it firmly with both hands. Chose a stable and safe position, 

especially on steps. 

-Check regularly that all screws are properly secured. Check the cutting blades regularly and, in case of damage, have them 

repaired of exchanged by an authorized service centre. 

-Make yourself familiar with your working area and be alert for possible hazards, which you might not her due to the motor 

noise. 

-Never touch the unprotected blades and never carry the machine taking hold of the blades. 

-When the hedge trimmer is not in use, for transport or storage, keep it in a dry place and out of the reach of children, and 

have the cutting blades always inserted into the protection cover. 

-Only use original spare parts and accessories supplied with the machine or recommended by the manufacturer. 

- To check the hedge for foreign objects, e.g. wire fences 

- Use a residual current device with a tripping current of 30 mA or less 

- To hold the hedge trimmer with both hands 

  

 

 

 

 

 

 

 

 

 

Summary of Contents for 023739













Reviews: