Nakayama 021841, User Manual

Page: 16 / 26

EN
16
WWW.NAKAYAMATOOLS.COM
Recycling and Disposal
1. Waste products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for
recycling advice.
2. Petrol, oil, used oil, mixtures of oil and petrol and objects contaminated with oil, e.g. cleaning cloths; do not belong with household waste. Dispose of
oil-contaminated items in accordance with the local guidelines and hand them in at recycling centres.
3. The product comes in a packaging that protects it against transportation damage. Keep hold of the packaging until you are sure that all the parts have been
delivered and the product is functioning properly. Recycle the packaging afterwards.
Problem Possible cause Solution
1. Engine does not start 1.1. Not enough fuel in fuel tank
1.2. Primer has been not pressed at cold start
1.3. Primer has been pressed at warm start
1.4. Spark plug is wet
1.5. Spark plug is damaged
1.6. Spark plug connector lose
1.1. Add fuel
1.2. Press the primer and restart
1.3. Dry spark plug
1.4. Dry spark plug
1.5. Replace spark plug
1.6. Attach properly
2. Engine stops 2.1. Not enough fuel in fuel tank
2.2. Cutting device is blocked
2.1 Add fuel
2.2 Remove blockage
3. Unsatisfactory cutting
performance
3.1 Saw chain not tensioned properly
3.2 Blunt saw chain
3.1 Tension properly
3.2 Sharpen or replace the saw chain
4. Excessive vibration/noise or
exhaust
4.1. Saw chain is dull/damaged
4.2. Bolts/nuts are loosen
4.3. Petrol/oil is incorrect
4.1 Replace with a new one
4.2. Tighten bolts/nuts
4.3. Empty out unused petrol/ oil and refill with
the correct petrol/oil