4. Set the Cup Wheel.
(1) Fit the correct Spacer [n] [o] [p] onto the spindle.
(2) Fit [m] Base Flange (or the standard flange from the angle
grinder) onto the Spacer.
(3) Fit the Cup Wheel onto the [m] Base Flange.
(4) Fit the Wheel Nut onto the spindle.
(5) Lock the spindle and securely tighten the Wheel Nut using the
flange spanner supplied with the angle grinder.
Choose correct Spacer which keep X and Y as below.
X
1<X<5
1<Y
Y
Spacer
( [n] [o] [p] )
[m] Base Flange
/ Standard Flange
Spindle
Cup Wheel
Wheel Nut
Wrench
GRINDING
Vacuum
Hose
[q]
Duct
1. Securely connect the Vacuum Hose to the port of
[a] Main Unit, using [q] Hose Adapter or other suitable
joint between the port and Vacuum Hose.
2. Securely hold the angle grinder body.
3. Turn the SW of vacuum and angle grinder on, then
start the grinding work.
-3-
[a]
