21
EN
FR
Manual Method (Cleaning and Lubricating the Interior)
1) Attach an E-Type Spray
Nozzle to the nozzle of the
PANA SPRAY Plus.
2) Shake the can 3 or 4 times,
and insert the E-Type spray
nozzle into the rear of the
handpiece while holding
E-Type Spray Nozzle
Fig. 17
the head of the handpiece with a cloth etc.
3) Hold the handpiece, and spray for 2 or 3 seconds until oil
comes out of the handpiece head (Fig. 17).
Repeat lubrication until foreign material stops coming out
of the tip.
CAUTION
• Do not use sprays other than NSK PANA SPRAY Plus. Using
sprays other than PANA SPRAY Plus may cause the
handpiece to overheat.
• Hold the spray can upright.
• Firmly hold the handpiece to prevent it slipping when spray
pressure is applied.
• Spray lubricant until it expels from the handpiece head.
• If you wish to purge excessive oil from inside the
handpiece, rotate the handpiece for approx 15 seconds
without a bur. During the rotation, do not depress the push
button, especially when using absorbent cloth to prevent oil
from scattering. Depressing the push button during rotation
may damage the chuck mechanism (Fig.18, Fig.19).
N-605_nano_contra_EN_WCS5_200824.indd 21
2020/08/24 13:31:33
Summary of Contents for NSK S-Max M
Page 1: ...001 OM C0597E ...
Page 2: ......
Page 78: ...N 605_nano_contra_FR_WCS5_200824 indd 76 2020 08 24 13 32 35 ...
Page 79: ...2020 XX XX 00N ...
