27
ENGLISH
Fig. 8
Fig. 9
Tool
Collet Nut
Collet Holder
Loosen
Tighten
Wrench
Collet Holder
Collet Nut
Tool
Wrench
Loosen
Tighten
9 - 2 Tool Replacement using a Preset Adapter
(1) Af
¿
x the preset adapter to the tool holder (
ȭ
20mm) etc.
(2) Align the collet holder to the drive dog notch of the preset adapter, and insert the
collet holder (Fig. 10).
(3) Attach the collet and collet nut to the collet holder, and lightly
¿
nger tighten.
(Do not tighten until the end) (Fig. 11).
(4) Insert the tool into the collet and set the wrench on the collet holder. Set the wrench
on the collet nut, and tighten the collet nut by turning clockwise (Fig. 12).
Preset Adapter
Collet Nut
Tighten
Loosen
Loosen
Wrench
Tighten
Collet Holder
QC3-
□
Fig. 10
Fig. 11
Fig. 12
RECOMMENDATION
Adjust the tool extension length using the preset adapter.
