Nakanishi AL-C1204, Operation Manual

Page: 6 / 8

14
①
Connect the
ȭ
6mm Air Hose to the Primary Inlet Connection.
②
Connect the
ȭ
6mm tubing to the Secondary Joint to the Air Input Quick Disconnect on the front of the
CONTROLLER.
③
Insert the
ȭ
6mm -
ȭ
4mm Conversion Adaptor into the Air Output Joint on the front of the CONTROLLER. Insert
the
ȭ
4mm Air Hose from the Conversion Adaptor Reducer to the 4mm Quick Disconnect on the back of the
motor (
ȭ
6mm -
ȭ
4mm Conversion adaptor : CONTROLLER's Standard Accessories) (Fig. 5).
To Air Compressor
Primary Joint
Air Input Joint
Motor (EM-3030J / EM-3060J)
E3000 CONTROLLER
Secondary Joint
Air Output Joint
④ Mounting the Air Line Kit
＜ Bottom Mounting ＞
When the Air Line Kit is mounted from the bottom in a horizontal position
Affix the (4) four Rubber Foot that are provided to the bottom Air Line Kit.
＜ Rear Mounting ＞
Attach the Air Line Kit M6 Mounting Screws that are provided.
When Rear Mounting, attach using the washers provided between mounting surface and rear surface (Fig. 6).
20 190
Bottom Rear
20
30
70
20
4-
ȭ
7
220
20 190 20
20
170
30
2- ȭ 7
10
ȭ
15
R3.5
Fig. 6
Fig. 5
6
. CONNECTION AND INSTALLATION of the Air Line Kit (Ex: installation)