1 EN
NOTICE
1. To prevent the risk of short citcuits, please keep the device away from water, liquid
and wet areas.
2. If water or any other liquid enters the device, please cut of power to the device
immediately and contact the nearest service centre for inspection.
3. There are no user-serviceable parts inside the device, please contact the nearest
service centre for any repairs or servicing.
4. The surface temperature of the device can go above 80 degrees celcius under
prolonged loads, a such please install the device in a safe location.
TROUBLESHOOTING
Please ensure that all cables are securely connected to the corresponding ports
before turning on the power.
Common troubleshooting procedures are listed below;
Follow the instructions
below for commonly
encountered problems.
when a fault occurs:
Please contact the
nearest service centre.
Issues persist after
factory reset
Please reset theunit to
factory settings.
Issues persist after
following
suggestions
Troubleshooting Methods:
Malfunction
Reason and Solution
No.
No Power
A. Check the power connection
B. Check the ACC connection
A. Is it in mute mode
B. Have you selected the correct input channel
A. Check the USB connection
B. Check if the driver "HID-compliant device" has
been installed in your PC
1
No Sound
2
Unable to connect USB
3
1. Amplifier
2. User Manual
3. USB2.0 Cable(1.5m)
4. Installation Bracket
5. Self-Tapping Oval Head Screws(4x20mm)
6. Cross Head Mechanical Screws(3x8mm)
7. Velcro
1pc
2pcs
1pc
2pcs
4pcs
4pcs
2sets
ACCESSORY LIST
