ACCESSORY LIST
1. User Manual (One in English and Chinese)
2. Mounting Screw Bag (Ø4x16mm x 4pcs, Ø4x6mm x 4pcs, Ø3x8mm x 2pcs,)
3. High Level Input Cable
4. Remote C Remote Cable
5. Mounting Bracket
6. Magic Tape (40x80mm)
7. Fuse
2pcs
1pc
1pc
1set
4pcs
2pcs
1pc
SPECIFICATIONS
100W
1000W
<0.4%
>90dB
20Hz - 150Hz
1V - 10V
120mV - 4V
N-power
Max power
THD
Signal-to-noise ratio
Frequency response
Input sensitivity,high level
Input sensitivity,low level
Low pass filter
Bass Boost
Subsonic Fiter
Fuse rating
Subwoofer
Dimensions (L x W x H) mm
50Hz - 150Hz
0 - 12dB
20Hz (Fixed)
20 A
6x8" , 4
Ω
260 x 195x 73mm
YOUR SPEAKER
• Protect all system wires from sharp edges by carefully routing them, always use
rubber grommets to protect wiring and cables whenever you are installing them
through metal openings.
• Secure all wiring using cable ties or wire clamps to protect them from moving parts
and sharp edges.
• This apparatus shall not be exposed to dripping or splashing, and no object filled
with liquids, shall be placed on the apparatus.
• Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as the power input terminals are
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
• Fuses shall be replaced only with the correct type and fuse value, and only when
the apparatus is powered off.
• Exposure to high sound pressure levels may lead to permanent hearing loss. Take
every precaution to protect your hearing.
• This product is designed specifically for use with 12 volt, negative- ground electrical
systems only. Using this product in systems with positive ground and/or voltages other
than 12V may result in damage to the product and your system.
2EN
