WIRING
LOW LEVEL INPUT WIRING
Low-level (RCA) input wiring is preferred for best audio performance. Most trunk and under-seat
installations will require a 6-12 feet RCA cable. Always use a high quality cable.
POWER CONNECTIONS
Connect the ground terminal to the closest point on the chassis of the vehicle. Use 8 gauge (or
heavier) wire to connect the ground cable.
Connect the remote terminal to the remote output of head unit using 16 gauge ( or heavier )
wire.
Connect an empty fuse holder within 16" (40 cm) of the car battery, and run 8 gauge (or heavier)
cable from this fuse to the amplifier location. Then connect the fuse holder to the "BATT+" (+12V)
connection on the subwoofer rear panel.
NOTE: Do not connect both the high level and low level inputs from your receiver to your amplifier
at the same time!
Fig.1
Fig.2
4EN
